Skip to content
NewNow in GermanAuf Deutsch
Camzify
Supported cameras · Hanwha Vision

Connect Hanwha Vision cameras to Camzify

Hanwha Vision IP cameras connect to Camzify over RTSP, so the cameras already installed can run AI detections, virtual patrol rounds and cloud recording without being replaced. Hanwha Vision, formerly Wisenet, numbers its streams as video profiles rather than main and sub streams, and keeps ONVIF switched on at all times. Hanwha itself treats RTSP as the fallback when its own API or ONVIF is not an option; for Camzify, RTSP is the direct route.

Hanwha Vision RTSP URL format

As Hanwha Vision’s own documentation gives it. Replace the parts in angle brackets with the camera’s values.

IP camera
rtsp://<username>:<password>@<camera-ip>:<port>/profile<number>/media.smp

554 is the default RTSP port and can be changed in the device's Network section. In Hanwha's VMS guidance, profile 2 is the camera's default H.264 stream and profile 3 its default H.265 stream.

Multi-sensor camera or encoder
rtsp://<camera-ip>:<port>/<sensor>/profile2/media.smp

<sensor> is the sensor (or encoder channel) number.

Through a Hanwha NVR
rtsp://<nvr-ip>:<port>/LiveChannel/<channel>/media.smp

Channels are numbered from 0. On an NVR the RTSP port is the last Device Port set on the unit: with 554–558, it is 558.

Turning on RTSP and ONVIF on a Hanwha Vision camera

Hanwha says its devices always have ONVIF enabled, so there is no switch to turn on. What it does ask is that the time, date, daylight saving time and time zone match between the camera and the system connecting to it.

For the stream itself, Hanwha's advice is to create a user account for the connection and not to give it admin rights.

Can a Hanwha Vision camera push RTMP?

Hanwha documents no native RTMP push from its cameras: its own RTMP guide relays the camera's RTSP stream through FFmpeg running on a PC. For Camzify, RTSP is the direct route. RTMP setup in Camzify.

Worth knowing before you connect

  • Hanwha notes that a camera's own web page plays H.265 only up to 720p, and for one third-party playback problem its advice is to use H.264 or a lower resolution.

Adding the Hanwha Vision stream to Camzify

  1. 1

    Check the stream plays

    Open the RTSP URL above in a player such as VLC. If it plays from outside the camera’s network, Camzify can connect it directly.

  2. 2

    Local only? Use the Connector

    If the camera is only on the local network, the Camzify Connector on a Windows, macOS or Linux machine there relays it, with no port forwarding.

  3. 3

    Add it in the console

    Camera Management → Add Camera, paste the URL (or pick the relayed stream) and enter the camera’s credentials. The RTSP setup guide has the detail.

What runs on Hanwha Vision cameras once they are connected

Once the stream is in Camzify, a Hanwha Vision camera is treated exactly like any other: the brand decides nothing about which features it can use.

Sources, checked 7 October 2026

Every Hanwha Vision-specific detail on this page comes from Hanwha Vision’s own documentation, listed below. Firmware changes menus over time; when the camera’s own interface differs, it is the authority.

Hanwha Vision is a trademark of its owner. This page states that Hanwha Vision cameras exposing a standard RTSP stream interoperate with Camzify; it does not imply partnership, endorsement or certification by Hanwha Vision.

Other camera brands

FAQ

Frequently asked questions

rtsp://<username>:<password>@<camera-ip>:<port>/profile<number>/media.smp, on the default port 554. Profile 2 is the default H.264 stream and profile 3 the default H.265 stream.

rtsp://<nvr-ip>:<port>/LiveChannel/<channel>/media.smp, with channels numbered from 0 and the port set to the last Device Port on the NVR.

No. Hanwha devices always have ONVIF enabled; keep the time and time zone in step with the system connecting to them.

Yes. Once the stream is added, Camzify runs virtual patrol rounds, its AI detections and cloud recording on a Hanwha camera like any other. The detections are Camzify's own and do not depend on the camera's built-in analytics.

Ready to patrol your site 24/7?

Book a 15-minute demo and see a live patrol run on your own cameras.